Revv Generator 100R MK3 120W Tube Amp Head Black
Revv Generator 100R MK3 120W Tube Amp Head Black
The Revv Amplification Generator 100R is based around our Red Channel – known for its thick low end & chewy feel. Over the years, our other channels had seen so much love from our fans that when it came time for MK3 we decided to rework the Red Channel almost from the ground up, resulting in something truly special. It may be the most striking tonal change to the entire MK3 line.
What is MK3? MK3 is the world’s first line of stereo-direct-output reactive load & impulse response tube amps. Not only does the Generator 100R MK3 bring you 3 channels of all-tube finely-tuned boutique Canadian tone based on feedback from world-class touring artists, session guitarists, & audio engineers – it also features Two notes Audio Engineering Torpedo-embedded DynIR Virtual Cabinet technology for going direct to FOH, studio monitors, or headphones. No cabinet required.
But it doesn’t stop there! A state-of-the-art noisegate & lush reverb are built right in! All accompanied by a host of switching & voicing updates to make getting the sound in your head faster than ever.
Generator 100R MK3 features 3 of Revv Amplification’s channels, each an original circuit! Its high gain Red Channel has an all new touch-sensitive feel which takes you from warm oldschool overdrive to the most massive modern tones available.. Another MK3 upgrade is a fully independent EQ for each channel. Take full control of all 3 channels! The clean Blue Channel is chimey with tons of headroom, & now includes a “Wide” switch to give you a wide-range frequency boost for more push & sustain. The crunch Green Channel feature 3 all-new drive modes to take this dynamic channel from edge of breakup, to clear overdrive, to classic stack tones.
Weight: 46 lbs
Includes bag, footswitch, and COA in box.
Type:Tube
Number of Channels:3
Total Power:120W (10W setting)
Preamp Tubes:5 x 12AX7
Power Tubes:4 x 6L6GC (power)
Reverb:Digital Reverb
Effects:Drive, Bright
EQ:3-band EQ
Amp Modeling:Virtual Cabs
Number of Models:6
Inputs:1 x 1/4"
Outputs:1 x 1/4" (16 ohm), 4 x 1/4" (4/8 ohm), 2 x XLR (Torpedo Out L/R)
Headphones:1 x 1/4"
Effects Loop:Yes
MIDI I/O:In/Thru
Other I/O:1 x 5-pin (lighting)
USB:1 x Type B
Bluetooth:Yes
Footswitch I/O:1 x MIDI
Footswitch Included:Yes, 6-button (channel/mute/FX)
Computer Connectivity:USB, Bluetooth
Construction Material:Baltic Birch plywood
Power Source:Standard IEC AC cable
Height:10.5"
Width:26.5"
Depth:10"
More Images
Revv Generator 100R MK3 120W Tube Amp Head Black
Revv Generator 100R MK3 120W Tube Amp Head Black
The Revv Amplification Generator 100R is based around our Red Channel – known for its thick low end & chewy feel. Over the years, our other channels had seen so much love from our fans that when it came time for MK3 we decided to rework the Red Channel almost from the ground up, resulting in something truly special. It may be the most striking tonal change to the entire MK3 line.
What is MK3? MK3 is the world’s first line of stereo-direct-output reactive load & impulse response tube amps. Not only does the Generator 100R MK3 bring you 3 channels of all-tube finely-tuned boutique Canadian tone based on feedback from world-class touring artists, session guitarists, & audio engineers – it also features Two notes Audio Engineering Torpedo-embedded DynIR Virtual Cabinet technology for going direct to FOH, studio monitors, or headphones. No cabinet required.
But it doesn’t stop there! A state-of-the-art noisegate & lush reverb are built right in! All accompanied by a host of switching & voicing updates to make getting the sound in your head faster than ever.
Generator 100R MK3 features 3 of Revv Amplification’s channels, each an original circuit! Its high gain Red Channel has an all new touch-sensitive feel which takes you from warm oldschool overdrive to the most massive modern tones available.. Another MK3 upgrade is a fully independent EQ for each channel. Take full control of all 3 channels! The clean Blue Channel is chimey with tons of headroom, & now includes a “Wide” switch to give you a wide-range frequency boost for more push & sustain. The crunch Green Channel feature 3 all-new drive modes to take this dynamic channel from edge of breakup, to clear overdrive, to classic stack tones.
Weight: 46 lbs
Includes bag, footswitch, and COA in box.
Type:Tube
Number of Channels:3
Total Power:120W (10W setting)
Preamp Tubes:5 x 12AX7
Power Tubes:4 x 6L6GC (power)
Reverb:Digital Reverb
Effects:Drive, Bright
EQ:3-band EQ
Amp Modeling:Virtual Cabs
Number of Models:6
Inputs:1 x 1/4"
Outputs:1 x 1/4" (16 ohm), 4 x 1/4" (4/8 ohm), 2 x XLR (Torpedo Out L/R)
Headphones:1 x 1/4"
Effects Loop:Yes
MIDI I/O:In/Thru
Other I/O:1 x 5-pin (lighting)
USB:1 x Type B
Bluetooth:Yes
Footswitch I/O:1 x MIDI
Footswitch Included:Yes, 6-button (channel/mute/FX)
Computer Connectivity:USB, Bluetooth
Construction Material:Baltic Birch plywood
Power Source:Standard IEC AC cable
Height:10.5"
Width:26.5"
Depth:10"
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Revv Generator 100R MK3 120W Tube Amp Head Black
The Revv Amplification Generator 100R is based around our Red Channel – known for its thick low end & chewy feel. Over the years, our other channels had seen so much love from our fans that when it came time for MK3 we decided to rework the Red Channel almost from the ground up, resulting in something truly special. It may be the most striking tonal change to the entire MK3 line.
What is MK3? MK3 is the world’s first line of stereo-direct-output reactive load & impulse response tube amps. Not only does the Generator 100R MK3 bring you 3 channels of all-tube finely-tuned boutique Canadian tone based on feedback from world-class touring artists, session guitarists, & audio engineers – it also features Two notes Audio Engineering Torpedo-embedded DynIR Virtual Cabinet technology for going direct to FOH, studio monitors, or headphones. No cabinet required.
But it doesn’t stop there! A state-of-the-art noisegate & lush reverb are built right in! All accompanied by a host of switching & voicing updates to make getting the sound in your head faster than ever.
Generator 100R MK3 features 3 of Revv Amplification’s channels, each an original circuit! Its high gain Red Channel has an all new touch-sensitive feel which takes you from warm oldschool overdrive to the most massive modern tones available.. Another MK3 upgrade is a fully independent EQ for each channel. Take full control of all 3 channels! The clean Blue Channel is chimey with tons of headroom, & now includes a “Wide” switch to give you a wide-range frequency boost for more push & sustain. The crunch Green Channel feature 3 all-new drive modes to take this dynamic channel from edge of breakup, to clear overdrive, to classic stack tones.
Weight: 46 lbs
Includes bag, footswitch, and COA in box.
Type:Tube
Number of Channels:3
Total Power:120W (10W setting)
Preamp Tubes:5 x 12AX7
Power Tubes:4 x 6L6GC (power)
Reverb:Digital Reverb
Effects:Drive, Bright
EQ:3-band EQ
Amp Modeling:Virtual Cabs
Number of Models:6
Inputs:1 x 1/4"
Outputs:1 x 1/4" (16 ohm), 4 x 1/4" (4/8 ohm), 2 x XLR (Torpedo Out L/R)
Headphones:1 x 1/4"
Effects Loop:Yes
MIDI I/O:In/Thru
Other I/O:1 x 5-pin (lighting)
USB:1 x Type B
Bluetooth:Yes
Footswitch I/O:1 x MIDI
Footswitch Included:Yes, 6-button (channel/mute/FX)
Computer Connectivity:USB, Bluetooth
Construction Material:Baltic Birch plywood
Power Source:Standard IEC AC cable
Height:10.5"
Width:26.5"
Depth:10"
